| Manufacturer |
Models |
Commands |
| Acer |
Note 350, 750, 760, 780, 950 |
Ctrl-Alt-ESC while computer boots activates
the setup menu; system config; advanced sys config; display
device; LCD/CRT |
| Canon |
BTO |
FN + F6 |
| |
Innova 386NX |
Setup Menu Option |
| |
Innova Book 360CD, 490CDS |
FN + F7 |
| |
NoteJet 3CX |
Change CMOS to CRT |
| Compaq |
Armada, LTE, Contura |
FN + F4 |
| |
Presario |
FN + F2 |
| |
Other |
Automatic, Ctrl-Alt < |
| DEC |
HiNote |
FN + F4 |
| |
425 SL |
FN + F5 |
| |
Other |
Automatic |
| Dell |
Latitude |
FN + F8 |
| |
CP-Inspiron |
FN + F12 |
| |
Other |
Ctrl-Alt-<, FN + D |
| Epson |
650C |
Set Switch to CRT |
| |
Other |
FN + F12 |
| Fujitsu |
Lifebook |
FN + F10 |
| Gateway |
Solo, Liberty |
FN + F3 |
| |
Colorbook |
FN + F1 |
| |
Colorbook 2 |
Option in CMOS setup |
| Hitachi |
M120T/1000, M100D |
FN + F7 |
| |
E100D/810 |
FN + F8 Windows CE Handheld Computers |
| |
|
Software option ONLY in PowerPoint |
| Hyundai |
All |
Set-up screen option |
| Hewlett
Packard |
Omnibook |
FN + F5 |
| IBM |
Thinkpad
310, 36x, 380, 701, 75X, 760, 560, 770 |
FN + F7 |
| |
Thinkpad 350, PS/Note 425C |
FN + F1 for setup |
| |
LX40 |
Setup LCD to CRT |
| |
Thinkpad 700 |
Ctrl-Alt-S |
| Macintosh |
G4 PowerBooks |
|
| |
iBooks |
|
| |
G3 PowerBooks |
Select Monitor Icon on Control Strip, select
desired resolution with Simulscan |
| |
|
|
| |
PowerBook 2400/3400 |
Select Monitor Icon on PowerBook Control
Strip,
Select Resolution to match display device
(e.g. 800x600 Simulscan for simultaneous display on PowerBook and
on projector)
|
| |
PowerBook 1400 |
Requires Optional Video Card.
Select Monitor Icon on PowerBook Control Strip,
Select Resolution to match display device
(e.g. 800x600 Simulscan for simultaneous display on PowerBook and
on projector) |
| |
PowerBook
160, 165, 180, 520, 540, 5300 |
Control Panel folder, PowerBook Display folder,
Activate Video Mirroring, warm reboot.
Or (if display problems occur w/mirroring)
Control Panel folder, Monitors, switch primary display by dragging
white menu bar to Monitor 2. |
| |
PowerBook 140,145,150,170 |
No Video Port. Requires 3rd party interface. |
| |
Portable 100 |
Not Compatible |
| Micron |
Millenia |
FN + F2 |
| Mitsubishi |
All |
SW2 On Off Off Off to activate
SW2 Off On On On to de-activate |
| NCR |
All |
Set-up screen option |
| NEC |
Versa 2000, 4000 series, 5000 series, 6000
series, M, P, V, MX series, Ultralite |
FN + F3 |
| |
Versa 2400 |
FN + F10 |
| |
Versa S |
FN + F2 |
| |
Other |
Select "Active" from set-up |
| Packard
Bell |
All |
FN + F10 |
| |
|
FN + F2 |
| Panasonic |
All |
FN + F2 |
| |
|
Panasonic set-up program |
| Samsung |
810 |
FN + F4 |
| |
55200 |
Set-up screen option |
| |
Pro 500 |
FN + F5Pro 800, Sens 700 |
| |
FN + F6 |
|
| Sanyo |
All |
Set-up screen option |
| Sharp |
All |
FN + F5 |
| Tandy |
All |
Ctrl-Alt-Insert |
| Tangent |
All |
FN + F5 |
| Texas
Instruments |
370, 390, Travelmate 7000 |
FN + F2 |
| |
Travelmate 2000 |
Switch CRT On |
| |
Travelmate LT286/45 |
Press SETUP key on keyboard |
| |
3000 |
type ALTVID at DOS prompt |
| |
4000 |
Ctrl-Alt-Setup |
| |
4000M and 4000E |
FN + Setup at DOS prompt - Screen Display
= BOTH |
| |
5000 |
Ctrl-Alt-Esc |
| |
5100/5200 |
Win95 Control Panel, TI SETUP, System Config,
Display device, LCD/CRT/both.
Win3.1 Travelmate n/b Setup, TI SETUP, System Config, Display device,
LCD/CRT/both. |
| |
6020, 6030, 6050, Extensa 600CD, 650CDT |
FN + F12 |
| |
Extensa 5xx/6xx Series |
FN + F10 |
| Toshiba |
1000, 1200, 1600, 3100E, 3200 |
FN + End |
| |
1100 |
Ctrl-Alt-End |
| |
1850 |
Reboot |
| |
T1910 Satellite |
Automatic, no simultaneous display |
| |
T1950CT, T1960CT |
TSetup Utility Int/Ext/Both |
| |
105CS, 110CT, 115CS, 200CDS, 400, 410, 415,
420, 430, 500CDT, 610, 650CT 2100CT,2105CT, 2130CS, 2150CS,
2150CDT, 2150CT, 2400CS, 2400CT, 2450CT, 3600DT, 4500, 4700,
4800, 4850, 4900, Tecra 700CDT, 720CDT, 730CDT |
FN + F5 |
| |
3100 |
Ctrl-Alt-End |
| |
3100E, 3200 |
FN + End |
| |
3100SX, 3200SX |
N/A PORT ACTIVE |
| |
3400 |
Needs SCSI adapter for ext. video |
| |
4400sx |
N/A PORT ACTIVE |
| |
5100 |
Ctrl-Alt-End |
| |
5100/100, 5200, 5200/100 |
N/A PORT ACTIVE |
| |
610CT |
Needs SCSI adapter for ext. video |
| Twinhead |
Slimnote 5100T, 9133CX |
FN + F5 |
| |
Slimnote 8xx Series |
FN + F5 |
| US
Logic |
All |
FN + F8 |
| Winbook |
XP, XP5 |
FN + F6 (simul) FN + F10 (int/ext) |
| |
XP5 Pro, FX |
FN + F12 |
| |
XL |
FN + F2 |
| |
LM |
FN + F8 |
| Wyse |
All |
Software driven |
| Zenith |
Z-Noteflex, Z-StarEX |
FN + F10 |
| |
Z-NoteGT |
FN + F7 |
| |
|
|
| |
|
|
|